Sunstone ships welders all over the world every day. Kindly note that Duties and Taxes are not calculated nor collected by Sunstone. In most cases, the assigned carrier will notify you of any additional required fees. Thank you!
![Orion mPulse Permanent Jewelry Welder](http://permanentjewelry.sunstonewelders.com/cdn/shop/files/mPulse3copy_843x700.png?v=1707349033)
IN STOCK • SHIP'S TODAY WHEN ORDERED BY 2:00 PM MDT
More permanent jewelry artists choose the Orion mPulse than any other pulse arc welder. How do we know that? Just do a quick social media search and take notice of which welder successful artists are using. It's the Orion mPulse. And here's why:
Trying to decide between the Upgraded ADL or the Basic ADL?
Watch this video here to compare the two auto-darkening lens (ADLs)
If you purchased the microscope system:
You also need:
Pulse arc welding (or micro TIG welding) uses electrical energy to create a plasma discharge. The high-temperature plasma, in turn, melts metal in a very small spot, a process that takes place in milliseconds. The process is clean, safe, and controllable. Pulse arc welding is perfect for permanent jewelry and closing fine chain of different metal types.
ONE: Measure Out the Chain
After your customer has chosen their preferred chain, wrap the chain around the wrist or ankle and determine a fit that is not too tight nor too loose. Mark the link on the chain you will cut.
TWO: Cut the Chain
Using the cutting pliers that come with the Sunstone Permanent Jewelry Kit, cut one side of the link in half. Do NOT cut the whole link in half. Make sure the cut link does not fall off the chain.
THREE: Prep the Link for Welding
Using the two chain pliers that come with your kit, bend the two ends of the cut link away from each other to create a gap wide enough to slide the uncut link (on the opposite side of the chain) through the cut link. Then bend the ends of the cut link back together. This step is much easier if you purchase the Orion mPulse with 5x microscopic optics.
FOUR: Keep Your Customers Safe
Place your customer's wrist or ankle under the automatic darkening lens, with the lens facing the customer. Instruct others in the room not to look directly at the chain when welding. Place the protective leather patch between the chain and your customer's skin to prevent a burn, which is unlikely but possible. Make sure your customer records the next step and posts to social media.
FIVE: Weld the Link Closed
On the Orion mPulse, select the power you'll need to weld the link closed. If you're unsure, start with a low amount of power, like 3 joules. Using the chain pliers that come with your kit, apply pressure to both ends of the cut link to bring them together. While maintaining pressure on both ends with the pliers, touch the joint to the electrode. The Orion mPulse will create a weld. Check the weld for position and strength.
SIX: Polish the Chain
Take the fiberglass brush that comes with your kit and polish the weld. Some types of metal will leave more soot than others.
The Orion mPulse can be purchased with the Sunstone Circle protection plan. For a small monthly payment you can protect your investment for as long as you remain a member, receive VIP customer service, enjoy free shipping should your welder need repairs, and more! Learn More Here.
The popularity and demand for permanent jewelry creates a wonderful business opportunity. You don't have to be a jeweler to be a permanent jewelry artist. With the Orion mPulse and practice you can quickly learn to close even the smallest fine chain bracelet or anklet. All you need are the right tools.
Let's take a quick look at the numbers:
Most permanent jewelry artists are investing about USD $4,000 for all the tools and supplies they need to get started. You may invest a bit more, or bit less depending upon the type of chain you sell. To breakeven, sell 100 anklets or bracelets at USD $40.
How quickly can you sell 100 bracelets or anklets?
At fairs or home parties, some permanent jewelry artists are selling 10 chains in two to three hours. Given that rate, you'll break even after only 10 events! Of course, these numbers will change due to a number of different possibilities; but it does give you an idea of how quickly you can recoup your investment.
How do you sell permanent jewelry?
Fair, farmers markets, and home parties seem to have the biggest return. Or add permanent jewelry to your existing jewelry studio, beauty shop, boutique, tattoo or piercing studio.
Sunstone's training team is ready to help you master the Orion mPulse Permanent Jewelry Welder Visit our Training Page to learn more.
Return Goods Policy
Seller’s products may be returned to Seller for credit within thirty (30) days of the shipment subject to the following conditions.
Sunstone offers a 30-day return policy on all products. Before sending a product back please contact Sunstone to receive an RMA number. The RMA number should appear clearly on the outside of the package. Customers are refunded via check. Please note that a 10% restocking fee will apply to all returns. Additionally, all 3rd party products must be insured when sent back to Sunstone at the buyer’s expense. In some cases, a merchant fee may apply. Equipment damaged by improper use or insufficient shipping precautions will be charged additional fees.
*Argon Mini Tanks are non-returnable. Standard size argon tanks have a $85 restocking fee, the tank must be emptied and left open with the protective cap put in place. All hazardous material and compressed gas stickers need to be removed from the packaging as the empty cylinder is not hazardous and doesn't contain compressed gas.
*Refunds will not be issued for services that have already been rendered such as shipping, calibration, or trainings.
Sunstone ships welders all over the world every day. Kindly note that Duties and Taxes are not calculated nor collected by Sunstone. In most cases, the assigned carrier will notify you of any additional required fees. Thank you!
{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}